What is slip and how does it work in manufacturing plastic film and bags. Slip is an organic chemical that is added to the blend during film extrusion process to modify the coefficient of friction (COF). COF is a measurement of the amount of friction between two surfaces as they begin to slide and as they continue to drag against one another.
The amount of energy it takes to put an object in motion is always greater than the amount of energy that it takes to keep it moving while it is in motion.
Although there are a number of chemicals that are used to modify the COF the two main ones used in Polyethylene and Polypropylene are Erucamide (which is considered a slow bloom) and Oleamide ( which is a fast bloom. The materials are sometimes called primary amides.
Slip is a very efficient molecule it has been added to a plastic film in very low concentrations typically 500 to 1500 parts per million (PPM). The slip additive can be let down at the levels of 1 to 3% by weight in blending while extruding the plastic film.
Slip molecules are very low in molecular weight as compared to the polymer in which they are used. These molecules are somewhat incompatible because of their nature. This means the material is bi-polar and has one end that has a positive charge and the other has a neutral charge. This incompatibility causes the molecule to migrate referred to as bloom through the polymer to the surface of the plastic film. The more slip that migrates on the surface the lower the COF and the more slippery the plastic film becomes.
The COF relates to packaging because the substrates used to package objects always come in contact with other surfaces or themselves. As most packaging operations are very high speed, COF plays a very large role. The packaging material must have just the right COF in order to track properly on the packaging machines. If a material is too slippery the film will not track properly and may cause issues such as bad sealing or cause a powder substance that builds up on the tracking rolls which will cause packaging failures. If a material becomes to sticky can have the opposite effect. It may not allow the film to un-wind properly and cause web brakes or other tracking problems. Either scenario can shut a packaging line down.
dbanig@prflexbag.com
I found your articule interesting while looking for information to educate me on poly bag manufacturing process. Please I've some questions to ask, 1)what is the best poly bag process, 2) how many poly bags can I produce from a bag of racine, 3) how to add designs to poly bags, 4) I intend to go into the production of poly bags what advise can you give me in terms of buying equipments, starting production, type of racine to be use and saving cost, 5) how to get the best equipment for this venture. Best regard
Posted by: Akin | November 26, 2008 at 08:35 PM